Marc
Guest
|
 Posted:
Tue Nov 30, 2004 12:23 am Post subject:
Marantz 2215B or 2216 PCB Lamp Part number needed |
|
|
Mounted on the PCB of the Marantz model 2216, there are two lamps
soldered directly to the pcb.
(the 2215B and the 2216 "appear" to use identical PCBs)
M701, and M702.
If someone has this part number, cross number, or an alternate part
number, I would greatly appreciate the info,
Thanks,
Mark
|
|
Tim Schwartz
Guest
|
| Posted:
Tue Nov 30, 2004 6:07 pm Post subject:
Re: Marantz 2215B or 2216 PCB Lamp Part number needed |
|
|
Marc,
In the manual I've got, M701 and 702 are listed as part number
IN1006035, Lamp, 6V. These are used as non-linear current limiting
resistors, and should not normally light up at all. I doubt they would
have failed, and if they show continuity, are probably OK. They feed
the base of the PNP output transistor, one in each channel.
Regards,
Tim Schwartz
Bristol Electronics
Marc wrote:
| Quote: |
Mounted on the PCB of the Marantz model 2216, there are two lamps
soldered directly to the pcb.
(the 2215B and the 2216 "appear" to use identical PCBs)
M701, and M702.
If someone has this part number, cross number, or an alternate part
number, I would greatly appreciate the info,
Thanks,
Mark |
|
|
Profile
Log in to check your private messages
Log in