DVD+ and DVD- What is the difference after burning which m
DVD-Software.info Forum Index DVD-Software.info
Your one stop source for DVD Software
 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
DVD+ and DVD- What is the difference after burning which m
 
Post new topic   Reply to topic    DVD-Software.info Forum Index -> DVDR
Author Message
guy henderson
Guest





Posted: Wed Oct 27, 2004 6:30 am    Post subject: DVD+ and DVD- What is the difference after burning which m Reply with quote

Haing faced this problem, why is a DVD+ disk less compatable than a
DVD- and why?????

Back to top
Daver
Guest





Posted: Wed Oct 27, 2004 9:45 am    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

There is a apparently a book type table at the start of a disk which says
what type of disk it is eg DVD Rom or DVD+R. For +R set top recorders disks
are typically always set to DVD Rom for maximum compatiblity. For PC
recorded disks +R is typically set to DVD+R and as a result is less
compatible with some players.
Many PC recorders allow compatibility bitsetting via a utility or as part of
Nero which forces the the disk book type to be set as DVD Rom
In my experience bitsetting helps. I had an old creative PC dvd drive which
wouldn't look at any recordable DVD except for a +R that had been bitset.
I'm not sure why everything isn't just set to DVD Rom straight off but it
may be to do with features that +R can offer provided the player nows its a
+R.


"guy henderson" <gfhenderson@earthlink.net> wrote in message
news:fr1un014j33ihbdp0v5h4kl46d1qkrhmu3@4ax.com...
Quote:
Haing faced this problem, why is a DVD+ disk less compatable than a
DVD- and why?????
Back to top
Bill in Co.
Guest





Posted: Wed Oct 27, 2004 9:50 am    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

-r disks came first, and have been around longer.

guy henderson wrote:
Quote:
Haing faced this problem, why is a DVD+ disk less compatable than a
DVD- and why?????
Back to top
Jack
Guest





Posted: Wed Oct 27, 2004 10:51 am    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

On Tue, 26 Oct 2004 19:30:20 -0700, guy henderson
<gfhenderson@earthlink.net> wrote:

Quote:
Haing faced this problem, why is a DVD+ disk less compatable than a
DVD-

DVD+ is newer format than DVD- (Fewer DVD+ players presently in use).

Quote:
and why?????

Newer Format means fewer existing players recognise DVD+ discs.
Back to top
tp
Guest





Posted: Fri Oct 29, 2004 9:03 pm    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

On Tue, 26 Oct 2004 19:30:20 -0700, guy henderson
<gfhenderson@earthlink.net> wrote:

Quote:
Haing faced this problem, why is a DVD+ disk less compatable than a
DVD- and why?????

dvd-r been around for years longer than dvd+r which is why more
players prefer dvd-r over that of dvd+r.
Back to top
Pug Fugley
Guest





Posted: Sat Oct 30, 2004 2:53 am    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

"tp" <tp@nowhere.com> wrote in message news:4182775e.1125609@news-server...
Quote:
On Tue, 26 Oct 2004 19:30:20 -0700, guy henderson
gfhenderson@earthlink.net> wrote:

Haing faced this problem, why is a DVD+ disk less compatable than a
DVD- and why?????

dvd-r been around for years longer than dvd+r which is why more
players prefer dvd-r over that of dvd+r.

That's pretty much a moot point though, as few people still have players
that are over 4 years old.
Back to top
MCheu
Guest





Posted: Sat Oct 30, 2004 3:10 am    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

On Fri, 29 Oct 2004 17:03:12 GMT, tp@nowhere.com (tp) wrote:

Quote:
On Tue, 26 Oct 2004 19:30:20 -0700, guy henderson
gfhenderson@earthlink.net> wrote:

Haing faced this problem, why is a DVD+ disk less compatable than a
DVD- and why?????

dvd-r been around for years longer than dvd+r which is why more
players prefer dvd-r over that of dvd+r.

The most common reason for the incompatibility is that the older DVD
players look at the header, which tells the drive what kind of disc it
is. Some of these early players would know what to do with DVD-R and
DVD-ROM (this is essentially what a pressed DVD movie is). It might
assume everything else was some sort of unsupported disc format like
DVD-RAM (which won't play on many DVD players either). It sees the
DVD+R ID and says "WTF?" and spits it back out.

That's why changing the booktype in the header to DVD-ROM for DVD+R
discs sometimes works. It makes the player see a disc type it
recognizes and at then it at least ATTEMPTs to play it. Most of the
time, the player is technically capable of playing DVD+R, the drive
just never tries to do it because the firmware says it doesn't know
what to do with it. Sort of like the kid that won't even try Brussel
sprouts. The biggest hurdle is getting it to try it.
---------------------------------------------

MCheu
Back to top
guy henderson
Guest





Posted: Sat Oct 30, 2004 7:14 am    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

On Fri, 29 Oct 2004 19:10:44 -0400, MCheu <mpcheu@yahoo.com> wrote:

Thank you all for the flood of responces to my question.
However I have found out that Panasonic players built in the last year
will not play DVD+ even though they advertise that they will play
them. I use Nero to burn and at times use a DVD duplicator to burn
both + and - and still the DVD+ have a problem. I am now only using
DVD- just to save myself the agony of redoing disks that I have sold.

I still do not understand whay certain MODERN players still gag on +.

Perhaps my question can not really be answered in full because of the
complex nature of DVD.

I used + because they burn twice as fast as -.

Guy
Back to top
guy henderson
Guest





Posted: Sat Oct 30, 2004 7:14 am    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

On Fri, 29 Oct 2004 19:10:44 -0400, MCheu <mpcheu@yahoo.com> wrote:

Thank you all for the flood of responces to my question.
However I have found out that Panasonic players built in the last year
will not play DVD+ even though they advertise that they will play
them. I use Nero to burn and at times use a DVD duplicator to burn
both + and - and still the DVD+ have a problem. I am now only using
DVD- just to save myself the agony of redoing disks that I have sold.

I still do not understand whay certain MODERN players still gag on +.

Perhaps my question can not really be answered in full because of the
complex nature of DVD.

I used + because they burn twice as fast as -.

Guy
Back to top
luminos
Guest





Posted: Sat Oct 30, 2004 12:09 pm    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

Quote:

I used + because they burn twice as fast as -.

Guy


Only in your corrupt perception.
Back to top
MCheu
Guest





Posted: Sat Oct 30, 2004 5:29 pm    Post subject: Re: DVD+ and DVD- What is the difference after burning whi Reply with quote

On Sat, 30 Oct 2004 01:09:19 -0700, "luminos" <logos1@trip.net> wrote:

Quote:


I used + because they burn twice as fast as -.

Guy


Only in your corrupt perception.


No, they may indeed burn twice as fast on his particular drive. Some
drives are spec'd to have different max speeds for DVD+R and DVD-R
media.
---------------------------------------------

MCheu
Back to top
 
Post new topic   Reply to topic    DVD-Software.info Forum Index -> DVDR All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Office Forum Access Forum Exchange Server

Powered by phpBB