| Author |
Message |
Adrian Brentnall
Guest
|
 Posted:
Sun Nov 28, 2004 12:09 am Post subject:
Track-by-track cueing CD player - does such a thing exist ? |
|
|
Hi All
Hope this is the right newsgroup to ask - you were all very helpful
earlier in the year when I was looking at ways of micing the rostrum
in our church..... (ended up with 2 boundary mics - works well -
thanks !)
Next problem.
We have 2 services (Sat & Sun) at the Church - up to now we've had 2
organists - so they've shared the work out between them - no problem.
One of our organists fell and broke her leg (badly) last week. This
leaves just the one - who can't be expected to turn out 2 days a week
- as well as the other work she does for the church.
So - solution - make a CD - so that when she's not there, she can be
there (if you see what I mean). Plan to record the three of four hymns
& other bits of music as separate tracks - and whoever's chairing the
service can then stop / start the CD player at the right points.
Taking this one step further - it'd be nice if the CD player could be
set up to play tracks in a specific sequence, and would automagically
<g> play a track then stop, cued and ready to play the next track in
the playlist......
Does such a piece of kit exist ? Or would it be possible to implement
this system by going fully 'solid-state' - maybe with an MP3
player....
Anybody been there & done that ??
Operation of the system needs to be _very_ simple - ideal would be a
single big red button labelled 'play next track' - but anything
approaching this level of simplicity would be good.....
I guess I could design / build something based around a PIC - talking
to a computer cd-rom drive - but if this particular wheel has already
been 'invented' then I'd rather not reinvent it again...
Thanks in advance
Adrian
Suffolk UK
|
|
| Back to top |
|
 |
Richard Crowley
Guest
|
| Posted:
Sun Nov 28, 2004 6:19 am Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
"Adrian Brentnall" <adrian@ambquality.co.uk> wrote in message
news:7b2iq0de5jjd5jrj429qovmosrubgfbl26@4ax.com...
| Quote: | Hi All
Hope this is the right newsgroup to ask - you were all very helpful
earlier in the year when I was looking at ways of micing the rostrum
in our church..... (ended up with 2 boundary mics - works well -
thanks !)
Next problem.
We have 2 services (Sat & Sun) at the Church - up to now we've had 2
organists - so they've shared the work out between them - no problem.
One of our organists fell and broke her leg (badly) last week. This
leaves just the one - who can't be expected to turn out 2 days a week
- as well as the other work she does for the church.
So - solution - make a CD - so that when she's not there, she can be
there (if you see what I mean). Plan to record the three of four hymns
& other bits of music as separate tracks - and whoever's chairing the
service can then stop / start the CD player at the right points.
Taking this one step further - it'd be nice if the CD player could be
set up to play tracks in a specific sequence, and would automagically
g> play a track then stop, cued and ready to play the next track in
the playlist......
Does such a piece of kit exist ? Or would it be possible to implement
this system by going fully 'solid-state' - maybe with an MP3
player....
Anybody been there & done that ??
Operation of the system needs to be _very_ simple - ideal would be a
single big red button labelled 'play next track' - but anything
approaching this level of simplicity would be good.....
I guess I could design / build something based around a PIC - talking
to a computer cd-rom drive - but if this particular wheel has already
been 'invented' then I'd rather not reinvent it again...
|
Elektor-Electronics April-2004 "Pandora's Sound & Music Box"
Uses a single microcontroller and controls a standard PC-style
CD-ROM drive. I believe it supports the "play next" function with
one of its buttons. |
|
| Back to top |
|
|
Paul Stamler
Guest
|
| Posted:
Sun Nov 28, 2004 12:16 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
"Adrian Brentnall" <adrian@ambquality.co.uk> wrote in message
news:7b2iq0de5jjd5jrj429qovmosrubgfbl26@4ax.com...
| Quote: | So - solution - make a CD - so that when she's not there, she can be
there (if you see what I mean). Plan to record the three of four hymns
& other bits of music as separate tracks - and whoever's chairing the
service can then stop / start the CD player at the right points.
Taking this one step further - it'd be nice if the CD player could be
set up to play tracks in a specific sequence, and would automagically
g> play a track then stop, cued and ready to play the next track in
the playlist......
Does such a piece of kit exist ?
|
Tascam pro units, designed primarily for radio station use, will do that. At
least, they'll play one track and stop, if you enable the "Auto Ready"
button. If your tracks on the CD are in the proper order, then you're home
free. I gather the Tascams can have sequences programmed in to them as well,
but I haven't needed to do that.
Peace,
Paul |
|
| Back to top |
|
|
Adrian Brentnall
Guest
|
| Posted:
Sun Nov 28, 2004 12:17 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
Hi Richard
On Sat, 27 Nov 2004 20:59:55 -0800, "Richard Crowley"
<rcrowley7@xprt.net> wrote:
| Quote: |
"Adrian Brentnall" <adrian@ambquality.co.uk> wrote in message
news:7b2iq0de5jjd5jrj429qovmosrubgfbl26@4ax.com...
Hi All
|
<snip>
| Quote: | I guess I could design / build something based around a PIC - talking
to a computer cd-rom drive - but if this particular wheel has already
been 'invented' then I'd rather not reinvent it again...
Elektor-Electronics April-2004 "Pandora's Sound & Music Box"
Uses a single microcontroller and controls a standard PC-style
CD-ROM drive. I believe it supports the "play next" function with
one of its buttons.
|
Aha - thanks for the 'lead'.
I've been to Elektor's site, but they don't have much online info on
this project - so I've emailed them to see if it#s possible to get a
reprint of the article.
From the fairly short parts list it doesn't look too daunting - but I
couldn't see any mention of any sort of display - maybe it doesn't
have one ?? I'd have thought a simple 'track number' display would be
helpful - at least you'd know that you're about to play the 'right'
track then...?
Thanks
Adrian
Suffolk UK
> |
|
| Back to top |
|
|
Richard Crowley
Guest
|
| Posted:
Sun Nov 28, 2004 5:18 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
"Adrian Brentnall" wrote ....
| Quote: | Aha - thanks for the 'lead'.
I've been to Elektor's site, but they don't have much online info on
this project - so I've emailed them to see if it#s possible to get a
reprint of the article.
From the fairly short parts list it doesn't look too daunting - but I
couldn't see any mention of any sort of display - maybe it doesn't
have one ?? I'd have thought a simple 'track number' display would be
helpful - at least you'd know that you're about to play the 'right'
track then...?
|
No display in the original article. However you have the source
code and with the serial LCD displays, it would be pretty easy
to add a display. If you have a fixed application (like a liturgy)
you could even "firm-wire" the names of the tracks ("Introit",
"Prayer Response", "Offertory", etc.) Or of you were really
ambitious, you could investigate how optional text is encoded. |
|
| Back to top |
|
|
Willie K.Yee, M.D.
Guest
|
| Posted:
Sun Nov 28, 2004 5:54 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
On Sat, 27 Nov 2004 23:20:13 +0000, Adrian Brentnall
<adrian@ambquality.co.uk> wrote:
| Quote: | Taking this one step further - it'd be nice if the CD player could be
set up to play tracks in a specific sequence, and would automagically
g> play a track then stop, cued and ready to play the next track in
the playlist......
Does such a piece of kit exist ?
|
Some consumer CD players can do this, or close. My ancient dbx dx5 can
be programmed to play tracks in a specific order. It wouldn't stop
automatically at the end of the track, but hitting Stop on the remote
and the the >> button would start the next track in the sequence. Not
fullproof however - the progam cannot be saved and will be lost if
power is turned off, and it would be easy to press the wrong button on
the remote.
Willie K. Yee, M.D. http://users.bestweb.net/~wkyee
Developer of Problem Knowledge Couplers for Psychiatry http://www.pkc.com
Webmaster and Guitarist for the Big Blue Big Band http://www.bigbluebigband.org |
|
| Back to top |
|
|
Jay Levitt
Guest
|
| Posted:
Sun Nov 28, 2004 6:03 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
In article <10qimqe3uora8a1@corp.supernews.com>, rcrowley7@xprt.net
says...
| Quote: | Taking this one step further - it'd be nice if the CD player could be
set up to play tracks in a specific sequence, and would automagically
g> play a track then stop, cued and ready to play the next track in
the playlist......
|
Absolutely.. the Marantz PMD330 has both single-track playback and
programmed-sequence playback modes.
--
Jay Levitt |
Wellesley, MA | Hi!
Faster: jay at jay dot eff-em | Where are we going?
http://www.jay.fm | Why am I in this handbasket? |
|
| Back to top |
|
|
Paul Stamler
Guest
|
| Posted:
Sun Nov 28, 2004 6:19 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
"Adrian Brentnall" <adrian@ambquality.co.uk> wrote in message
news:6t8jq0tvtmv1m1k1760kn0g1osq1hva4di@4ax.com...
| Quote: | Tascam pro units, designed primarily for radio station use, will do that.
At
least, they'll play one track and stop, if you enable the "Auto Ready"
button. If your tracks on the CD are in the proper order, then you're
home
free. I gather the Tascams can have sequences programmed in to them as
well,
but I haven't needed to do that.
Peace,
Paul
Thanks for the reply.
I'm guessing that the 'Pro' bit comes with a suitably high price tag ?
As usual, we'd like to do this for as little cost as possible.
|
Medium, but they make up for it by being able to work, day in and day out,
for years on end, whereas a lot of consumer-type CD players keel over and
die after a year or two of serious button-pushing.
| Quote: | Also, operation needs to be as simple / foolproof as possible -
hence the ideal of a big red #next# button <g
|
Well, if the tracks are burned onto the CD in the order in which they'll be
played, you just keep hitting Play.
Peace,
Paul |
|
| Back to top |
|
|
Adrian Brentnall
Guest
|
| Posted:
Sun Nov 28, 2004 6:20 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
HI Paul
On Sun, 28 Nov 2004 08:07:13 GMT, "Paul Stamler"
<pstamlerhell@pobox.com> wrote:
| Quote: | "Adrian Brentnall" <adrian@ambquality.co.uk> wrote in message
news:7b2iq0de5jjd5jrj429qovmosrubgfbl26@4ax.com...
So - solution - make a CD - so that when she's not there, she can be
there (if you see what I mean). Plan to record the three of four hymns
& other bits of music as separate tracks - and whoever's chairing the
service can then stop / start the CD player at the right points.
Taking this one step further - it'd be nice if the CD player could be
set up to play tracks in a specific sequence, and would automagically
g> play a track then stop, cued and ready to play the next track in
the playlist......
Does such a piece of kit exist ?
Tascam pro units, designed primarily for radio station use, will do that. At
least, they'll play one track and stop, if you enable the "Auto Ready"
button. If your tracks on the CD are in the proper order, then you're home
free. I gather the Tascams can have sequences programmed in to them as well,
but I haven't needed to do that.
Peace,
Paul
|
Thanks for the reply.
I'm guessing that the 'Pro' bit comes with a suitably high price tag ?
As usual, we'd like to do this for as little cost as possible.
Also, operation needs to be as simple / foolproof as possible -
hence the ideal of a big red #next# button <g>
Regards
Adrian
Suffolk UK |
|
| Back to top |
|
|
Willie K.Yee, M.D.
Guest
|
| Posted:
Mon Nov 29, 2004 12:27 am Post subject:
Saving an old receiver - was: Track-by-track cueing CD playe |
|
|
On Sun, 28 Nov 2004 17:38:36 GMT, "Paul Stamler"
<pstamlerhell@pobox.com> wrote:
| Quote: | Medium, but they make up for it by being able to work, day in and day out,
for years on end, whereas a lot of consumer-type CD players keel over and
die after a year or two of serious button-pushing.
|
My dbx CD player is still going strong after 15 years with no
maintenance.
HOWEVER, my Proton D940 receiver, just as old, may be on its last
legs. I will be taking it to a shop for repairs, but I am wondering if
it is worth it. It has multiple problems: blows power fuses every hour
now, intermittent cutoff in the Rr CD channel (seems like a dirty
switch, but that is inaccessible), the the LED's on the radio station
readout sometimes do not work.
If it could be done, I would like to have this machine restored,
including re-capping it if that is indicated and if this repair
service can do it (I have the schematics).
Why bother? All the stuff I see in the stores (all our hi-fi specialty
stores have gone belly up in the last decades) looks like junk. Cheap
lightweight construction visible on outside examination. As I go up
the price range I get a shit-load of features that I really don't
want, like 5.1, when I would rather have all the amp power available
for stereo. The Proton has the I/Os, power, and features I need and
has served me as my needs have grown.
Is it time to give up the ghost, or is there stuff available that I am
simply not seeing?
I realize this question might better be answered on an audiophile
group, but I suspect I know their answer: buy something new. And I
respect the opinions of those here who are not busy responding to
political trolls.
Willie K. Yee, M.D. http://users.bestweb.net/~wkyee
Developer of Problem Knowledge Couplers for Psychiatry http://www.pkc.com
Webmaster and Guitarist for the Big Blue Big Band http://www.bigbluebigband.org |
|
| Back to top |
|
|
squeeziechum
Guest
|
| Posted:
Mon Nov 29, 2004 12:28 am Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
How about a software solution: isn't it possible to program a pause at the
end of each track on a CD? I thought I saw this option in Samplitude.
Phil / Houston
"Adrian Brentnall" <adrian@ambquality.co.uk> wrote in message
news:7b2iq0de5jjd5jrj429qovmosrubgfbl26@4ax.com...
| Quote: | Hi All
Hope this is the right newsgroup to ask - you were all very helpful
earlier in the year when I was looking at ways of micing the rostrum
in our church..... (ended up with 2 boundary mics - works well -
thanks !)
Next problem.
We have 2 services (Sat & Sun) at the Church - up to now we've had 2
organists - so they've shared the work out between them - no problem.
One of our organists fell and broke her leg (badly) last week. This
leaves just the one - who can't be expected to turn out 2 days a week
- as well as the other work she does for the church.
So - solution - make a CD - so that when she's not there, she can be
there (if you see what I mean). Plan to record the three of four hymns
& other bits of music as separate tracks - and whoever's chairing the
service can then stop / start the CD player at the right points.
Taking this one step further - it'd be nice if the CD player could be
set up to play tracks in a specific sequence, and would automagically
g> play a track then stop, cued and ready to play the next track in
the playlist......
Does such a piece of kit exist ? Or would it be possible to implement
this system by going fully 'solid-state' - maybe with an MP3
player....
Anybody been there & done that ??
Operation of the system needs to be _very_ simple - ideal would be a
single big red button labelled 'play next track' - but anything
approaching this level of simplicity would be good.....
I guess I could design / build something based around a PIC - talking
to a computer cd-rom drive - but if this particular wheel has already
been 'invented' then I'd rather not reinvent it again...
Thanks in advance
Adrian
Suffolk UK |
|
|
| Back to top |
|
|
Adrian Brentnall
Guest
|
| Posted:
Tue Nov 30, 2004 12:11 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
Hi Richard
On Sun, 28 Nov 2004 04:18:08 -0800, "Richard Crowley"
<rcrowley7@xprt.net> wrote:
| Quote: | "Adrian Brentnall" wrote ....
Aha - thanks for the 'lead'.
I've been to Elektor's site, but they don't have much online info on
this project - so I've emailed them to see if it#s possible to get a
reprint of the article.
From the fairly short parts list it doesn't look too daunting - but I
couldn't see any mention of any sort of display - maybe it doesn't
have one ?? I'd have thought a simple 'track number' display would be
helpful - at least you'd know that you're about to play the 'right'
track then...?
No display in the original article. However you have the source
code and with the serial LCD displays, it would be pretty easy
to add a display. If you have a fixed application (like a liturgy)
you could even "firm-wire" the names of the tracks ("Introit",
"Prayer Response", "Offertory", etc.) Or of you were really
ambitious, you could investigate how optional text is encoded.
|
Thanks for the comments.
There are two formats - one for the Saturday Service (hymn1, hymn2,
hymn3, Vesper) and one for the Sunday Service (hymn1, hymn2, healing
hymn, hymn3, Hymn 4, Vesper) - so that's not too complicated.
I was imagining that showing some kind of display might offer some
comfidence that 'what was about to be played' was the right thing -
but it's probably over-complicating the thing. So long as there's the
'one-shot' action (pressing the big switch gets you one track, and
then the unit waits, cued up) then 'nothing can go wrong' <g>.
Only trouble is - no response from Elektor, at the moment - so I can't
see the detail of the project.... I've found a company that will
provide a PCB for 17 euros - so that's a start. Don't suppose you've
got access to a copier or a scanner and could do me a paper or digital
copy, could you ?? I'd be very grateful..... and cover any costs that
you might incur.
Thanks again for your assistance
Adrian
Suffolk UK. |
|
| Back to top |
|
|
Adrian Brentnall
Guest
|
| Posted:
Tue Nov 30, 2004 6:07 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
HI Amy
On Tue, 30 Nov 2004 10:57:22 -0500, "Arny Krueger" <arnyk@hotpop.com>
wrote:
| Quote: | "Adrian Brentnall" <adrian@ambquality.co.uk> wrote in message
news:cg4pq0hsddtedeba210ovf4drbr9t1sa3g@4ax.com
HI Amy
On Tue, 30 Nov 2004 09:13:54 -0500, "Arny Krueger" <arnyk@hotpop.com
wrote:
Anybody been there & done that ??
What I've done is use multiple CD players, and put CDs I obtained
or burned in each one, and cued them up and left them in pause
before the service. I put a stick-on post-it on each one, noting
what is inside. I then press the appropriate play button at the
appropriate time.
CD players are dirt cheap. 2 get the job done for me.
If you run out of inputs on your console, a line mixer makes a nice
extender for the inputs on your console. Good examples of such
devices include the Rane SM 26 http://www.rane.com/sm26b.html or
Behringer Ultralink http://www.behringer.com/MX882/index.cfm?lang=ENG
It'd all be a great deal simpler if there was always somebody there at
the Church who could act as 'sound engineer'.
Ah, the prerequisite dedicated volunteer.
|
Yes - these things can take over your life if you let them - but I
guess you already know that ??
| Quote: |
Short of volunteering my services full-time <g> - there ain't no such
animal.
I'm trying to train a stable full of back-ups and replacements.
|
Mmmm - nice idea <g>
| Quote: |
So - it needs a _simple_ system that can be operated by the person -
running the service - hence the idea of a 'service -on-a-CD', and a
big 'next' button that plays the next track & then stops......
I suppose that a PC could be programmed with one of the jillion music
players that are downloadble...
|
Yes - but that's going up the 'complication scale' rather than down it
- and there's no room on the rostrum for a pc (physically or maybe
ideologically....) - needs to be a really simple solution..... (do I
keep saying that ?)
| Quote: |
We've been 'spoilt' over the last ten years or so by having 'live'
organists - but we're none of us getting any younger......
Indeed having a church service where all the music comes from traditional
sources tends to drive off the younger prospects.
|
Well, we're a bit different. It's a Spiritualist church, and we
actually do get a fairly wide spread of ages in the congregation -
and, somehow, the 'good old' hymns seem more appropriate....
Most people are there for the upliftment or in the hope of getting
communication from their love ones in spirit - so there's no really
need for 'jazzing up' the service with happy-clappy music......
Thanks again
Adrian
Suffolk UK |
|
| Back to top |
|
|
Richard Crowley
Guest
|
| Posted:
Tue Nov 30, 2004 6:07 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
"Adrian Brentnall" <adrian@ambquality.co.uk> wrote...
| Quote: | I was imagining that showing some kind of display might offer some
comfidence that 'what was about to be played' was the right thing -
but it's probably over-complicating the thing. So long as there's the
'one-shot' action (pressing the big switch gets you one track, and
then the unit waits, cued up) then 'nothing can go wrong' <g>.
Only trouble is - no response from Elektor, at the moment - so I can't
see the detail of the project.... I've found a company that will
provide a PCB for 17 euros - so that's a start. Don't suppose you've
got access to a copier or a scanner and could do me a paper or digital
copy, could you ?? I'd be very grateful..... and cover any costs that
you might incur.
|
They are right there in your own country. They claim to sell back-
issues for the cover price + postage. Give them a call (or "ring them"
as you say). I am 8 timezones away and it would be a violation of
international copyright for me to send you a copy as much as I would
like to. OTOH, if they cannot supply a copy of the issue, I can scan
it for you. |
|
| Back to top |
|
|
Arny Krueger
Guest
|
| Posted:
Tue Nov 30, 2004 6:07 pm Post subject:
Re: Track-by-track cueing CD player - does such a thing exis |
|
|
"Adrian Brentnall" <adrian@ambquality.co.uk> wrote in message
news:7b2iq0de5jjd5jrj429qovmosrubgfbl26@4ax.com
| Quote: |
So - solution - make a CD - so that when she's not there, she can be
there (if you see what I mean). Plan to record the three of four hymns
& other bits of music as separate tracks - and whoever's chairing the
service can then stop / start the CD player at the right points.
Taking this one step further - it'd be nice if the CD player could be
set up to play tracks in a specific sequence, and would automagically
g> play a track then stop, cued and ready to play the next track in
the playlist......
Does such a piece of kit exist ? Or would it be possible to implement
this system by going fully 'solid-state' - maybe with an MP3
player....
Anybody been there & done that ??
|
What I've done is use multiple CD players, and put CDs I obtained or burned
in each one, and cued them up and left them in pause before the service. I
put a stick-on post-it on each one, noting what is inside. I then press the
appropriate play button at the appropriate time.
CD players are dirt cheap. 2 get the job done for me.
If you run out of inputs on your console, a line mixer makes a nice extender
for the inputs on your console. Good examples of such devices include the
Rane SM 26 http://www.rane.com/sm26b.html or Behringer Ultralink
http://www.behringer.com/MX882/index.cfm?lang=ENG |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in