DVD-Software.info

[Guest]

Hello. I Have a 89 fire bird that now has a fitted premade box
holding 2 12in JL audio W1 speakers in it . It is powered by a JL
250/1 channel amp bridged . My deck is a new panasonic 5.5 volts
coming out the RCA cables . I was just in a SPL competition this past
weekend and i lost to an old old crossfire 32/2 pushing a MTX 15 in
dual voice coil at 2 oams at each coil (I think that brought him down
to 1/2 oam ). Ok what i want to do is fiberglass the back of my car in
so i can rum bigger and better speakers and posably go to a phinox golg
amp .... but i dont know .. I cant seam to find any amps that can
match that crossfire in the 1/2 oam load and what would be the best
speaker i can get????
any sujestions?????? please Email me your thoughts Thanks
cryoman101@yahoo.com

[Chris Mullins]

if you want to win the comp, i'd suggest put more money into your system.
2ohm coils could be wired to 4 or 1 ohm, i'm guessing he was running at 1

All i can say is more speaker and more power. I've heard great things about
digital designs subs, and get a few thousand watts to them, i'm sure you'll
kill the MTX. Of course i thinik they're about $1000/sub. RE XXX seems to
be a fan favorite witht he MT being more comp oriented. I know a guy that
runs 10" orions and i think he's above 145s IIRC,

the prefab box is definately holding you back, but i don't know if i'd do
fibergalss for a comp install. Until you become good with the glass i'd
just do bigger MDF ported boxes. You should get a noticeable increase in
output.

also how are your subs wired? you said you have a 250/1 channel amp bridged?
if i understand you right you have a one channel amp but how are you
bridging it?

your subs should get no more than 250 each according to JL's site but i
don't see what the voic coil configs are? Are yours dual voice coils or
single? i see that there are 4 or 8 ohm options, so i'm guessing you have
single 4s wired parallel to 2ohms . Which i just noticed doesn't matter
cause your amp does 250w from 1.5-4 ohm. Your first upgrade could be simple
new boxes that are ported and another 250 amp to put on the other sub. That
should give you a good gain in output.



<cryoman101@yahoo.com> wrote in message
news:1131565271.447476.97430@z14g2000cwz.googlegroups.com...