A&H GL2200 Channel Insert question
DVD-Software.info Forum Index DVD-Software.info
Your one stop source for DVD Software
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
A&H GL2200 Channel Insert question

 
Post new topic   Reply to topic    DVD-Software.info Forum Index -> Live Sound
Author Message
soundpro
Guest
Posted: Thu Nov 10, 2005 5:42 am    Post subject: A&H GL2200 Channel Insert question Reply with quote
Briefly: we're going to do live sound and record (up to) 24 channels at
the same time. The recording guy wants to use the insert on each
channel 1st click to send to the HD24. Since I can't seem to find my
manual (arrrrgh), I can't remember if it's pre or post eq. I think 1st
click is the send pre eq and the 2nd interrupts the circuit
(obviously). Not sure...

Can anyone out there shed light on the situation?

Many thanks!

Back to top
Rupert
Guest
Posted: Thu Nov 10, 2005 5:42 am    Post subject: Re: A&H GL2200 Channel Insert question Reply with quote
soundpro wrote:
Quote:
Briefly: we're going to do live sound and record (up to) 24 channels at
the same time. The recording guy wants to use the insert on each
channel 1st click to send to the HD24. Since I can't seem to find my
manual (arrrrgh), I can't remember if it's pre or post eq. I think 1st
click is the send pre eq and the 2nd interrupts the circuit
(obviously). Not sure...

Can anyone out there shed light on the situation?

Many thanks!

Here you go:

http://www.allen-heath.com/veterans/gl2200.htm

Rupert
Back to top
Ron(UK)
Guest
Posted: Thu Nov 10, 2005 9:23 am    Post subject: Re: A&H GL2200 Channel Insert question Reply with quote
BillHart,KarenPierce wrote:
Quote:

soundpro wrote:

Briefly: we're going to do live sound and record (up to) 24 channels at
the same time. The recording guy wants to use the insert on each
channel 1st click to send to the HD24. Since I can't seem to find my
manual (arrrrgh), I can't remember if it's pre or post eq. I think 1st
click is the send pre eq and the 2nd interrupts the circuit
(obviously). Not sure...

Can anyone out there shed light on the situation?


I think someone tried to record from the insert jacks on our GL3000 and
found that they were not set up to support the 1-click trick.

BH


It`s far more satisfactory to make up some special cables using TRS
plugs with tip and ring shorted or buy some of these >>>
www.lunevalleyaudio.com/rca.jpg

IMO

Ron(UK)
--
Lune Valley Audio
Public address system
Hire, Sales, Repairs
www.lunevalleyaudio.com
Back to top
BillHart,KarenPierce
Guest
Posted: Thu Nov 10, 2005 12:39 pm    Post subject: Re: A&H GL2200 Channel Insert question Reply with quote
soundpro wrote:

Quote:
Briefly: we're going to do live sound and record (up to) 24 channels at
the same time. The recording guy wants to use the insert on each
channel 1st click to send to the HD24. Since I can't seem to find my
manual (arrrrgh), I can't remember if it's pre or post eq. I think 1st
click is the send pre eq and the 2nd interrupts the circuit
(obviously). Not sure...

Can anyone out there shed light on the situation?

I think someone tried to record from the insert jacks on our GL3000 and
found that they were not set up to support the 1-click trick.

BH


----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Back to top
Mike
Guest
Posted: Thu Nov 10, 2005 6:32 pm    Post subject: Re: A&H GL2200 Channel Insert question Reply with quote
Quote:
Briefly: we're going to do live sound and record (up to)
24 channels at the same time. The recording guy wants
to use the insert on each channel 1st click to send to the
HD24. Since I can't seem to find my manual (arrrrgh),
I can't remember if it's pre or post eq. I think 1st click
is the send pre eq and the 2nd interrupts the circuit

The insert is pre-EQ and is only affected by the preamp trim level.
Here's a link to the block diagram on the A&H web site.
http://www.allen-heath.com/DL/gl2200_block_diagram.pdf

Now, if you wanted to have some fun, you could modify the channels so
that the direct out is also pre-EQ output.

Mike Borkhuis
Back to top
Arny Krueger
Guest
Posted: Thu Nov 10, 2005 8:05 pm    Post subject: Re: A&H GL2200 Channel Insert question Reply with quote
"BillHart,KarenPierce" <billhart@cedar-rapids.net> wrote in
message news:1131604979_16985@spool6-east.superfeed.net
Quote:
soundpro wrote:

Briefly: we're going to do live sound and record (up to)
24 channels at the same time. The recording guy wants to
use the insert on each channel 1st click to send to the
HD24. Since I can't seem to find my manual (arrrrgh), I
can't remember if it's pre or post eq. I think 1st click
is the send pre eq and the 2nd interrupts the circuit
(obviously). Not sure... Can anyone out there shed light
on the situation?

I think someone tried to record from the insert jacks on
our GL3000 and found that they were not set up to support
the 1-click
trick.

I'm wondering why the A&H web site shows no traces of a
manual for the GL3000.
Back to top
Rupert
Guest
Posted: Thu Nov 10, 2005 11:45 pm    Post subject: Re: A&H GL2200 Channel Insert question Reply with quote
Arny Krueger wrote:
Quote:
"BillHart,KarenPierce" <billhart@cedar-rapids.net> wrote in
message news:1131604979_16985@spool6-east.superfeed.net
soundpro wrote:

Briefly: we're going to do live sound and record (up to)
24 channels at the same time. The recording guy wants to
use the insert on each channel 1st click to send to the
HD24. Since I can't seem to find my manual (arrrrgh), I
can't remember if it's pre or post eq. I think 1st click
is the send pre eq and the 2nd interrupts the circuit
(obviously). Not sure... Can anyone out there shed light
on the situation?

I think someone tried to record from the insert jacks on
our GL3000 and found that they were not set up to support
the 1-click
trick.


I'm wondering why the A&H web site shows no traces of a
manual for the GL3000.

You must be looking the wrong place. It's been out of production for a
while, so it will not be on the main console pages:

http://www.allen-heath.com/veterans/gl3000.htm

Rupert
Back to top
Arny Krueger
Guest
Posted: Thu Nov 10, 2005 11:48 pm    Post subject: Re: A&H GL2200 Channel Insert question Reply with quote
"Rupert" <foodsteaks@linkline.com> wrote in message
news:1131644734.608186.316060@g43g2000cwa.googlegroups.com
Quote:
Arny Krueger wrote:
"BillHart,KarenPierce" <billhart@cedar-rapids.net> wrote
in message
news:1131604979_16985@spool6-east.superfeed.net
soundpro wrote:

Briefly: we're going to do live sound and record (up
to) 24 channels at the same time. The recording guy
wants to use the insert on each channel 1st click to
send to the HD24. Since I can't seem to find my manual
(arrrrgh), I can't remember if it's pre or post eq. I
think 1st click is the send pre eq and the 2nd
interrupts the circuit (obviously). Not sure... Can
anyone out there shed light on the situation?

I think someone tried to record from the insert jacks on
our GL3000 and found that they were not set up to
support the 1-click
trick.


I'm wondering why the A&H web site shows no traces of a
manual for the GL3000.

You must be looking the wrong place. It's been out of
production for a while, so it will not be on the main
console pages:

http://www.allen-heath.com/veterans/gl3000.htm

Rupert

Thanks.
Back to top
 
Post new topic   Reply to topic    DVD-Software.info Forum Index -> Live Sound All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Office Forum Access Forum Windows Server Exchange Server

Powered by phpBB