| Author |
Message |
Dewey V. \"Marty\" Martin
Guest
|
 Posted:
Thu Nov 03, 2005 9:00 pm Post subject:
JVC duplicator SVHS pin out |
|
|
HI
I'm looking for the pin-out diagram for the JVS 777 series
duplicators...uses the same 7 pin Y/C 358 plug found on the back of most
u-matic machines as a dub in or out.
Need to find out how to connet the 4 wires on a standard S-VHS connector to
the right pins on the Y/C 358
Anyone with a mnaul for the JVC 777 duplicators could help
Thanks
|
|
| Back to top |
|
 |
Larry J.
Guest
|
| Posted:
Thu Nov 03, 2005 11:54 pm Post subject:
Re: JVC duplicator SVHS pin out |
|
|
Waiving the right to remain silent, "Dewey V. \"Marty\" Martin"
<martin@vandcd.com> said:
| Quote: | Need to find out how to connet the 4 wires on a standard S-VHS
connector to the right pins on the Y/C 358
|
The dub signal on the U-Matic is *NOT* S-Video.
--
Larry Jandro
Video Engineering & Equipment Rentals
Scottsdale, Arizona, USA
[Remove spamtrap in ALLCAPS to reply] |
|
| Back to top |
|
|
Dewey V. \"Marty\" Martin
Guest
|
| Posted:
Sun Nov 06, 2005 12:16 am Post subject:
Re: JVC duplicator SVHS pin out |
|
|
"Larry J." <usenet2@DE.LETE.THISljvideo.com> wrote in message
news:Xns97036EFC5C5FBthefrogprince@68.6.19.6...
| Quote: | Waiving the right to remain silent, "Dewey V. \"Marty\" Martin"
martin@vandcd.com> said:
Need to find out how to connet the 4 wires on a standard S-VHS
connector to the right pins on the Y/C 358
The dub signal on the U-Matic is *NOT* S-Video.
|
Yes, I know. However, the JVC br-777 series duplicators use that same
CONNECTOR as is normally found on a U-matic deck for Dub IN or OUT. As you
know, this is a 7 pin connector. I am trying to find out which 4 of the 7
pins are used to sent the duplicators a S-VHS signal, and which part of the
sgnal goes to which pin. Obvioulsy, you don't know this. I hope someone
who does will reply.
| Quote: |
--
Larry Jandro
Video Engineering & Equipment Rentals
Scottsdale, Arizona, USA
[Remove spamtrap in ALLCAPS to reply]
|
|
|
| Back to top |
|
|
Richard Crowley
Guest
|
| Posted:
Sun Nov 06, 2005 1:02 am Post subject:
Re: JVC duplicator SVHS pin out |
|
|
"Dewey V. "Marty" Martin" <martin@vandcd.com> wrote in message
news:9G6bf.5203$8W.1650@newssvr30.news.prodigy.com...
| Quote: |
"Larry J." <usenet2@DE.LETE.THISljvideo.com> wrote in message
news:Xns97036EFC5C5FBthefrogprince@68.6.19.6...
Waiving the right to remain silent, "Dewey V. \"Marty\" Martin"
martin@vandcd.com> said:
Need to find out how to connet the 4 wires on a standard S-VHS
connector to the right pins on the Y/C 358
The dub signal on the U-Matic is *NOT* S-Video.
Yes, I know. However, the JVC br-777 series duplicators use that same
CONNECTOR as is normally found on a U-matic deck for Dub IN or OUT.
As you know, this is a 7 pin connector. I am trying to find out which
4 of the 7 pins are used to sent the duplicators a S-VHS signal, and
which part of the sgnal goes to which pin. Obvioulsy, you don't know
this. I hope someone who does will reply.
|
Are you sure Sony uses the same Y/C 358 signal as JVC?
I thought Sony used a lower-frequency hetrodyne. |
|
| Back to top |
|
|
Steve Guidry
Guest
|
| Posted:
Mon Nov 07, 2005 9:50 pm Post subject:
Re: JVC duplicator SVHS pin out |
|
|
"Richard Crowley" <rcrowley@xpr7t.net> wrote in message
news:11mq0egk4jp4bbd@corp.supernews.com...
| Quote: |
"Dewey V. "Marty" Martin" <martin@vandcd.com> wrote in message
news:9G6bf.5203$8W.1650@newssvr30.news.prodigy.com...
"Larry J." <usenet2@DE.LETE.THISljvideo.com> wrote in message
news:Xns97036EFC5C5FBthefrogprince@68.6.19.6...
Waiving the right to remain silent, "Dewey V. \"Marty\" Martin"
martin@vandcd.com> said:
Need to find out how to connet the 4 wires on a standard S-VHS
connector to the right pins on the Y/C 358
The dub signal on the U-Matic is *NOT* S-Video.
Yes, I know. However, the JVC br-777 series duplicators use that same
CONNECTOR as is normally found on a U-matic deck for Dub IN or OUT.
As you know, this is a 7 pin connector. I am trying to find out which
4 of the 7 pins are used to sent the duplicators a S-VHS signal, and
which part of the sgnal goes to which pin. Obvioulsy, you don't know
this. I hope someone who does will reply.
Are you sure Sony uses the same Y/C 358 signal as JVC?
I thought Sony used a lower-frequency hetrodyne.
|
The JVC uses Y/C 629, not 358. Just connecting the SVHS decks up to a 3/4"
decks with this cable - - even wired correctly - - will yield a black and
white signal because the color is referenced to a different frequency.
Steve |
|
| Back to top |
|
|
Dewey V. \"Marty\" Martin
Guest
|
| Posted:
Tue Nov 08, 2005 3:55 am Post subject:
Re: JVC duplicator SVHS pin out |
|
|
I can't tell you hopw much I appreciate that you have read my message and
have taken the time to reply.
However, it appears NONE of you have read my message correctly
I am NOT tryoing to send 358/YC singals to a JVS duplicator...
The JVS 777 series duplicators use the same 7 PIN CONNECTOR (sorry, I don't
know the name) as is found on U-matics. I have the proper four ping S-VHS
out signal....I am simply trying to find out whatch 4 of the seven pins are
used.
Regards
"Steve Guidry" <steveguidry@earthlink.net> wrote in message
news:4JKbf.5348$2y.2036@newsread2.news.atl.earthlink.net...
| Quote: |
"Richard Crowley" <rcrowley@xpr7t.net> wrote in message
news:11mq0egk4jp4bbd@corp.supernews.com...
"Dewey V. "Marty" Martin" <martin@vandcd.com> wrote in message
news:9G6bf.5203$8W.1650@newssvr30.news.prodigy.com...
"Larry J." <usenet2@DE.LETE.THISljvideo.com> wrote in message
news:Xns97036EFC5C5FBthefrogprince@68.6.19.6...
Waiving the right to remain silent, "Dewey V. \"Marty\" Martin"
martin@vandcd.com> said:
Need to find out how to connet the 4 wires on a standard S-VHS
connector to the right pins on the Y/C 358
The dub signal on the U-Matic is *NOT* S-Video.
Yes, I know. However, the JVC br-777 series duplicators use that same
CONNECTOR as is normally found on a U-matic deck for Dub IN or OUT.
As you know, this is a 7 pin connector. I am trying to find out which
4 of the 7 pins are used to sent the duplicators a S-VHS signal, and
which part of the sgnal goes to which pin. Obvioulsy, you don't know
this. I hope someone who does will reply.
Are you sure Sony uses the same Y/C 358 signal as JVC?
I thought Sony used a lower-frequency hetrodyne.
The JVC uses Y/C 629, not 358. Just connecting the SVHS decks up to a
3/4"
decks with this cable - - even wired correctly - - will yield a black and
white signal because the color is referenced to a different frequency.
Steve
|
|
|
| Back to top |
|
|
Richard Crowley
Guest
|
| Posted:
Tue Nov 08, 2005 5:14 am Post subject:
Re: JVC duplicator SVHS pin out |
|
|
"Dewey V. "Marty" Martin" wrote ...
| Quote: | I can't tell you hopw much I appreciate that you have read my message and
have taken the time to reply.
However, it appears NONE of you have read my message correctly
I am NOT tryoing to send 358/YC singals to a JVS duplicator...
The JVS 777 series duplicators use the same 7 PIN CONNECTOR (sorry, I
don't know the name) as is found on U-matics. I have the proper four ping
S-VHS out signal....I am simply trying to find out whatch 4 of the seven
pins are used.
|
Perhaps if you had explained why you wanted to know
(and/or what you were trying to do) it might have helped
understand your question. Assuming you don't have the
service manual (or access to one)? |
|
| Back to top |
|
|
Larry J.
Guest
|
| Posted:
Tue Nov 08, 2005 11:36 pm Post subject:
Re: JVC duplicator SVHS pin out |
|
|
Waiving the right to remain silent, "Richard Crowley"
<richard.7.crowley@intel.com> said:
| Quote: | "Dewey V. "Marty" Martin" wrote ...
I can't tell you hopw much I appreciate that you have read my
message and have taken the time to reply.
However, it appears NONE of you have read my message correctly
I am NOT tryoing to send 358/YC singals to a JVS duplicator...
The JVS 777 series duplicators use the same 7 PIN CONNECTOR
(sorry, I don't know the name) as is found on U-matics. I have
the proper four ping S-VHS out signal....I am simply trying to
find out whatch 4 of the seven pins are used.
Perhaps if you had explained why you wanted to know
(and/or what you were trying to do) it might have helped
understand your question. Assuming you don't have the
service manual (or access to one)?
|
I tried to find the BR-777 recorder at JVC's professional systems web
site. Doesn't seem to exist there. Must be quite old.
He should just call JVC and attempt to find a service tech who can
answer the question...
--
Larry Jandro
Video Engineering & Equipment Rentals
Scottsdale, Arizona, USA
[Remove spamtrap in ALLCAPS to reply] |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in