| Author |
Message |
izozaya
Guest
|
 Posted:
Fri Nov 26, 2004 10:13 am Post subject:
Help needed on Grommes output transformers |
|
|
Hi all!
I happen to have a couple of unknown output transformers. The dealer I
got them from told me they were scavenged from a Grommes amplifier,
but couldn't precise whether HiFi or PA.
They are model TO-102, grey in color and weight around 10 pounds each.
I measured them in a primitive way and they seem to have a 2K3
anode-to-anode primary impedance (maybe an EL34 parallel push-pull?).
Does anyone have a clue on these?
Thanks in advance!!!
|
|
| Back to top |
|
 |
Ned Carlson
Guest
|
| Posted:
Tue Nov 30, 2004 6:08 am Post subject:
Re: Help needed on Grommes output transformers |
|
|
On Fri, 26 Nov 2004 01:00:00 +0000, izozaya wrote:
| Quote: | Hi all!
I happen to have a couple of unknown output transformers. The dealer I got
them from told me they were scavenged from a Grommes amplifier, but
couldn't precise whether HiFi or PA.
They are model TO-102, grey in color and weight around 10 pounds each. I
measured them in a primitive way and they seem to have a 2K3
anode-to-anode primary impedance (maybe an EL34 parallel push-pull?).
Does anyone have a clue on these?
|
Probably the output for a Grommes 100W PA head,
something like this:
http://www.triodeel.com/images/g101a.gif
While they're not good to 20 Hz at 100W, the
bandwidth is pretty decent, altho I don't have
figures, I've fixed the amps before and they
sounded pretty good. Some of them were used in movie
theaters, so the bandwidth had to be at least good enough
for that.
--
Ned Carlson Triode Electronics Chicago,IL USA
www.triodeelectronics.com |
|
| Back to top |
|
|
izozaya
Guest
|
| Posted:
Tue Nov 30, 2004 12:11 pm Post subject:
Re: Help needed on Grommes output transformers |
|
|
Thanks Ned!
Yes, they look pretty much like PA OPTs, but will give them a try
anyway in HiFi. Maybe a parallel push-pull with EL37...
Best regards
"Ned Carlson" <postmaster@triodeel.com> wrote in message news:<pan.2004.11.30.01.05.55.133040@triodeel.com>...
| Quote: | On Fri, 26 Nov 2004 01:00:00 +0000, izozaya wrote:
Hi all!
I happen to have a couple of unknown output transformers. The dealer I got
them from told me they were scavenged from a Grommes amplifier, but
couldn't precise whether HiFi or PA.
They are model TO-102, grey in color and weight around 10 pounds each. I
measured them in a primitive way and they seem to have a 2K3
anode-to-anode primary impedance (maybe an EL34 parallel push-pull?).
Does anyone have a clue on these?
Probably the output for a Grommes 100W PA head,
something like this:
http://www.triodeel.com/images/g101a.gif
While they're not good to 20 Hz at 100W, the
bandwidth is pretty decent, altho I don't have
figures, I've fixed the amps before and they
sounded pretty good. Some of them were used in movie
theaters, so the bandwidth had to be at least good enough
for that. |
|
|
| Back to top |
|
|
|
|
|
|
Profile
Log in to check your private messages
Log in