| Author |
Message |
Don
Guest
|
 Posted:
Wed Oct 26, 2005 2:56 am Post subject:
Printable DVD template for CorelDraw |
|
|
Does anyone know where I can find a template for CorelDraw that will allow
me to design and print directly to printable DVD media to my Epson R300
instead of using the very limited Epson PrintCD software? Basically need to
know how to position artwork so it "hits" the DVD in correct alignment when
in the tray.
Thanks
Don
|
|
| Back to top |
|
 |
Paul Heslop
Guest
|
| Posted:
Wed Oct 26, 2005 4:40 am Post subject:
Re: Printable DVD template for CorelDraw |
|
|
Don wrote:
| Quote: |
Does anyone know where I can find a template for CorelDraw that will allow
me to design and print directly to printable DVD media to my Epson R300
instead of using the very limited Epson PrintCD software? Basically need to
know how to position artwork so it "hits" the DVD in correct alignment when
in the tray.
Thanks
Don
|
have you taken a look at accoustica cd/dvd label maker? It's very
cheap, comes with loads of extra downloadable free graphics and has
loads of options, including the ability to read a songlist from a cd.
http://www.acoustica.com/cd-label-maker/
--
Paul (Sometimes my mind plays tricks on me)
-------------------------------------------------------
Stop and Look
http://www.geocities.com/dreamst8me/ |
|
| Back to top |
|
|
dave
Guest
|
| Posted:
Wed Oct 26, 2005 3:37 pm Post subject:
Re: Printable DVD template for CorelDraw |
|
|
try Acoustica CD Label Maker i use it it 100% better and easyer than the
espons program
"Don " <none@isp.com> wrote in message
news:mv6dnWbFZ40XNMPenZ2dnUVZ_s-dnZ2d@wideopenwest.com...
| Quote: | Does anyone know where I can find a template for CorelDraw that will allow
me to design and print directly to printable DVD media to my Epson R300
instead of using the very limited Epson PrintCD software? Basically need
to
know how to position artwork so it "hits" the DVD in correct alignment
when
in the tray.
Thanks
Don
|
|
|
| Back to top |
|
|
Joe
Guest
|
| Posted:
Mon Oct 31, 2005 12:43 pm Post subject:
Re: Printable DVD template for CorelDraw |
|
|
"Don" <none@isp.com> wrote:
| Quote: | Does anyone know where I can find a template for CorelDraw that will allow
me to design and print directly to printable DVD media to my Epson R300
instead of using the very limited Epson PrintCD software? Basically need to
know how to position artwork so it "hits" the DVD in correct alignment when
in the tray.
Thanks
Don
|
Check out the SureThing at www.surething.com which has lot of unique
features most others don't. I don't have R300 but it does support my Epson
Photo Stylus 900, and you don't need the stinky CorelDraw to do the simple
thing. Here are few main features
- It will keep the ratio of the original image (so you won't have image
looks too fat or too thin). This is one of the MUST HAVE feature
- Tons of templates for many different manufactures, and many CD printers
- Built-in image enhance, background, Front-Art (many diff styles) |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in