| Author |
Message |
Guest
|
 Posted:
Mon Oct 24, 2005 12:10 pm Post subject:
Adding a line out? request for theory and advice |
|
|
Any advice on adding a ?fixed line output for the following circuit?
http://members.myactv.net/~je2a3/JELsc-linepre1.jpg
I happen to have all the bits/bobs for this circuit, and I've recently
acquired a COW ADC. I'm hoping to spit out (as digital) my main
system output to the rest of the house/patio. Not to mention
recording. . .
Any suggestions?
thanks in advance. . .
I'm using a 7 input selector (2 tuners, 2 phonos, 1 digital computer,
1 CD player, 1 mp3 line) to the ALPS switch.
Kelvin<Cold
|
|
| Back to top |
|
 |
Pooh Bear
Guest
|
| Posted:
Tue Oct 25, 2005 10:16 am Post subject:
Re: Adding a line out? request for theory and advice |
|
|
zerocold3NOSPAM@comcast.net wrote:
| Quote: | Any advice on adding a ?fixed line output for the following circuit?
http://members.myactv.net/~je2a3/JELsc-linepre1.jpg
I happen to have all the bits/bobs for this circuit, and I've recently
acquired a COW ADC. I'm hoping to spit out (as digital) my main
system output to the rest of the house/patio. Not to mention
recording. . .
|
Duplicate the cathode follower section to provide an independent output.
Graham |
|
| Back to top |
|
|
Iain M Churches
Guest
|
| Posted:
Tue Oct 25, 2005 1:15 pm Post subject:
Re: Adding a line out? request for theory and advice |
|
|
"Pooh Bear" <rabbitsfriendsandrelations@hotmail.com> wrote in message
news:435DBFC2.987E3C1E@hotmail.com...
| Quote: |
zerocold3NOSPAM@comcast.net wrote:
Any advice on adding a ?fixed line output for the following circuit?
http://members.myactv.net/~je2a3/JELsc-linepre1.jpg
I happen to have all the bits/bobs for this circuit, and I've recently
acquired a COW ADC. I'm hoping to spit out (as digital) my main
system output to the rest of the house/patio. Not to mention
recording. . .
Duplicate the cathode follower section to provide an independent output.
Graham
|
Or simpler, convert the cathode follower to a mu-follower to get one high-
impedance and one low impedance output. The extra gain would allow
some NFB.
Iain |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in