KT90
DVD-Software.info Forum Index DVD-Software.info
Your one stop source for DVD Software
 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
KT90
 
Post new topic   Reply to topic    DVD-Software.info Forum Index -> Tubes
Author Message
Iain M Churches
Guest





Posted: Thu Sep 15, 2005 4:31 pm    Post subject: KT90 Reply with quote

Does anyone have experience with the KT90 ?
How do they compare sonically with KT88
and 6550? Is there current production?

Iain

Back to top
Jon Yaeger
Guest





Posted: Thu Sep 15, 2005 5:20 pm    Post subject: Re: KT90 Reply with quote

in article dgbluv$p8b$2@phys-news1.kolumbus.fi, Iain M Churches at
tael@kolumbus.fi wrote on 9/15/05 7:31 AM:

Quote:
Does anyone have experience with the KT90 ?
How do they compare sonically with KT88
and 6550? Is there current production?

Iain


Jim McShane has a lot of experience with KT-90s.

I have a quad of them that I plan to install in a HK Citation II when I
complete rebuilding it.

McShane says that they are sonically superior to the KT-88 in the Citation
application.

AFAIK they are still being produced in Yugoslavia. But apparently the
company making them has produced "good ones" and "bad ones".

I suggest you contact Jim for more info.

Jon
Back to top
Jim McShane
Guest





Posted: Thu Sep 15, 2005 5:37 pm    Post subject: Re: KT90 Reply with quote

Iain M Churches wrote...

Quote:
Does anyone have experience with the KT90 ?
How do they compare sonically with KT88
and 6550? Is there current production?

Iain,

Check my tube page on my site. The KT90 Ei is
a great tube when it's made right, but sadly
the current production has problems. The EH
(not a typo, EH) is blah.

FWIW, I sold my quad of GEC KT-88s after
I got my first KT-90 Eis. I never regretted it.

Drop me a note if you need more than what's
on my site.

Jim McShane
Need Tubes? Got a H-K Citation (Pre) Amp?
Check http://pages.prodigy.net/jimmcshane
Repro knobs for Citation gear in stock!
Back to top
Iain M Churches
Guest





Posted: Thu Sep 15, 2005 6:09 pm    Post subject: Re: KT90 Reply with quote

"Jim McShane" <jimmcshane@prodigy.net> wrote in message
news:qWdWe.679$gK.248@newssvr22.news.prodigy.net...
Quote:
Iain M Churches wrote...

Does anyone have experience with the KT90 ?
How do they compare sonically with KT88
and 6550? Is there current production?

Iain,

Check my tube page on my site. The KT90 Ei is
a great tube when it's made right, but sadly
the current production has problems. The EH
(not a typo, EH) is blah.

FWIW, I sold my quad of GEC KT-88s after
I got my first KT-90 Eis. I never regretted it.

Drop me a note if you need more than what's
on my site.

Jim McShane


Hi Jim,

I have been asked to look out for some KT90s
for a small batch of 50W amps currently being
built.

I had the feeling that Svetlana made them too
but apparently not. (Their EL34 is exceptionally
good, and of very consistent quality)

Excellent website:-)

Iain
Back to top
Patrick Turner
Guest





Posted: Thu Sep 15, 2005 9:36 pm    Post subject: Re: KT90 Reply with quote

Iain M Churches wrote:

Quote:
Does anyone have experience with the KT90 ?

Yes, KT90EH seem ok.

Quote:

How do they compare sonically with KT88
and 6550? Is there current production?

More percieved bass definition.

Otherwise not much difference imho.
More brute force.

Patrick Turner.

Quote:


Iain
Back to top
Patrick Turner
Guest





Posted: Thu Sep 15, 2005 10:05 pm    Post subject: Re: KT90 Reply with quote

Iain M Churches wrote:

Quote:
"Jim McShane" <jimmcshane@prodigy.net> wrote in message
news:qWdWe.679$gK.248@newssvr22.news.prodigy.net...
Iain M Churches wrote...

Does anyone have experience with the KT90 ?
How do they compare sonically with KT88
and 6550? Is there current production?

Iain,

Check my tube page on my site. The KT90 Ei is
a great tube when it's made right, but sadly
the current production has problems. The EH
(not a typo, EH) is blah.

FWIW, I sold my quad of GEC KT-88s after
I got my first KT-90 Eis. I never regretted it.

Drop me a note if you need more than what's
on my site.

Jim McShane

Hi Jim,

I have been asked to look out for some KT90s
for a small batch of 50W amps currently being
built.

I had the feeling that Svetlana made them too
but apparently not. (Their EL34 is exceptionally
good, and of very consistent quality)

Excellent website:-)

One can get 40 watts class AB with a pair of KT90 in triode.

I have tried a pair in a Quad II amp which is ok because
they fit OK, and have 1.6A of heater current, same as KT66.
But ONE KT90 is like TWO KT66,
so you get about 25% more power in an Quad amp
using the same idle current as the KT66.
The limiting factor is anode voltage swing and the crummy Quad II OPT.
But Ro is also about 2/3 the KT66 case.
They are no harder to drive than KT66, KT88 etc.

I prefer the KT90EH to the Ei, the EH is like a new type of tube;
the internals looks like the anode is simply 10mm taller than in the
KT88/6550EH
which as far as I know are exactly the same internally.

The extra 10mm of metal means the plate dissipation is better.
The KT90EH could be allowed to idle at 35 watts.

Having 550V on the anode and screen is also OK for triode and UL.

Patrick Turner.

Quote:


Iain
Back to top
fryzz
Guest





Posted: Sat Sep 17, 2005 11:30 pm    Post subject: Re: KT90 Reply with quote

I use them in my Citation II, they sound great.

Frank
Back to top
DanF
Guest





Posted: Sun Sep 18, 2005 4:45 am    Post subject: Re: KT90 Reply with quote

Jim McShane wrote:

Quote:
Iain,

Check my tube page on my site. The KT90 Ei is
a great tube when it's made right, but sadly
the current production has problems. The EH
(not a typo, EH) is blah.
Drop me a note if you need more than what's
on my site.
!



Hello,
How can one tell the difference between the Type I, II, and III Ei
KT-90 tubes? Are there markings, writing, structure differences? Can
somebody post pictures?
Thanks, Daniel
Back to top
 
Post new topic   Reply to topic    DVD-Software.info Forum Index -> Tubes All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Office Forum Access Forum Exchange Server

Powered by phpBB