| Author |
Message |
Bodysnatcher
Guest
|
 Posted:
Sat Nov 06, 2004 10:12 pm Post subject:
Just to confirm? |
|
|
Hi.
Can anyone tell me if this is correct,
Brought a wintv pvr250 capture card, this comes with moviefactory2.
Not really happy with this set-up, so as I've had some success with
capturing vhs tape using vitualdub, tempgnec xpress and author, tried to use
this card with vitualdub but it does not seem to recognize the card. Is it
not supported or have i got to D/L something else to make it see the card?
Cheers
|
|
| Back to top |
|
 |
Bodysnatcher
Guest
|
| Posted:
Sat Nov 06, 2004 11:36 pm Post subject:
Re: Just to confirm? |
|
|
Is Womble better,easy to work then MF2 or MF3?
The problem I 've had with both is the removing of frames of unwanted video.
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqjd73bk4vf5c@corp.supernews.com...
| Quote: | Nothing is better than the win2000 capture program for that card, use it
and
educate yourself, I have created many dvds with it.I use:
Win2000 to capture.
Womble for editing
DVDWorkshop for chapter, etc.
You wont need any other software.
"Bodysnatcher" <GetLost@btinternet.com> wrote in message
news:cmji8f$16l$1@sparta.btinternet.com...
Hi.
Can anyone tell me if this is correct,
Brought a wintv pvr250 capture card, this comes with moviefactory2.
Not really happy with this set-up, so as I've had some success with
capturing vhs tape using vitualdub, tempgnec xpress and author, tried to
use
this card with vitualdub but it does not seem to recognize the card. Is
it
not supported or have i got to D/L something else to make it see the
card?
Cheers
|
|
|
| Back to top |
|
|
doS
Guest
|
| Posted:
Sun Nov 07, 2004 3:18 am Post subject:
Re: Just to confirm? |
|
|
Nothing is better than the win2000 capture program for that card, use it and
educate yourself, I have created many dvds with it.I use:
Win2000 to capture.
Womble for editing
DVDWorkshop for chapter, etc.
You wont need any other software.
"Bodysnatcher" <GetLost@btinternet.com> wrote in message
news:cmji8f$16l$1@sparta.btinternet.com...
| Quote: | Hi.
Can anyone tell me if this is correct,
Brought a wintv pvr250 capture card, this comes with moviefactory2.
Not really happy with this set-up, so as I've had some success with
capturing vhs tape using vitualdub, tempgnec xpress and author, tried to
use
this card with vitualdub but it does not seem to recognize the card. Is it
not supported or have i got to D/L something else to make it see the card?
Cheers
|
|
|
| Back to top |
|
|
doS
Guest
|
| Posted:
Sun Nov 07, 2004 4:53 am Post subject:
Re: Just to confirm? |
|
|
I love womble, its effective and very fast.and cuts are a breeze.
"Bodysnatcher" <GetLost@btinternet.com> wrote in message
news:cmjn6i$7vi$1@sparta.btinternet.com...
| Quote: | Is Womble better,easy to work then MF2 or MF3?
The problem I 've had with both is the removing of frames of unwanted
video.
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqjd73bk4vf5c@corp.supernews.com...
Nothing is better than the win2000 capture program for that card, use it
and
educate yourself, I have created many dvds with it.I use:
Win2000 to capture.
Womble for editing
DVDWorkshop for chapter, etc.
You wont need any other software.
"Bodysnatcher" <GetLost@btinternet.com> wrote in message
news:cmji8f$16l$1@sparta.btinternet.com...
Hi.
Can anyone tell me if this is correct,
Brought a wintv pvr250 capture card, this comes with moviefactory2.
Not really happy with this set-up, so as I've had some success with
capturing vhs tape using vitualdub, tempgnec xpress and author, tried
to
use
this card with vitualdub but it does not seem to recognize the card. Is
it
not supported or have i got to D/L something else to make it see the
card?
Cheers
|
|
|
| Back to top |
|
|
Ken Maltby
Guest
|
| Posted:
Sun Nov 07, 2004 5:09 am Post subject:
Re: Just to confirm? |
|
|
You might try VideoReDo www.VideoReDo.com it is the new
guy and tries harder.
Luck;
Ken
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqovsqh1i6562@corp.supernews.com...
| Quote: | I love womble, its effective and very fast.and cuts are a breeze.
"Bodysnatcher" <GetLost@btinternet.com> wrote in message
news:cmjn6i$7vi$1@sparta.btinternet.com...
Is Womble better,easy to work then MF2 or MF3?
The problem I 've had with both is the removing of frames of unwanted
video.
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqjd73bk4vf5c@corp.supernews.com...
Nothing is better than the win2000 capture program for that card, use
it
and
educate yourself, I have created many dvds with it.I use:
Win2000 to capture.
Womble for editing
DVDWorkshop for chapter, etc.
You wont need any other software.
"Bodysnatcher" <GetLost@btinternet.com> wrote in message
news:cmji8f$16l$1@sparta.btinternet.com...
Hi.
Can anyone tell me if this is correct,
Brought a wintv pvr250 capture card, this comes with moviefactory2.
Not really happy with this set-up, so as I've had some success with
capturing vhs tape using vitualdub, tempgnec xpress and author, tried
to
use
this card with vitualdub but it does not seem to recognize the card.
Is
it
not supported or have i got to D/L something else to make it see the
card?
Cheers
|
|
|
| Back to top |
|
|
doS
Guest
|
| Posted:
Sun Nov 07, 2004 5:25 am Post subject:
Re: Just to confirm? |
|
|
Then frame by frame edit isnt there...
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:iIudnf9qstMM-hDcRVn-pg@giganews.com...
| Quote: | You might try VideoReDo www.VideoReDo.com it is the new
guy and tries harder.
Luck;
Ken
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqovsqh1i6562@corp.supernews.com...
I love womble, its effective and very fast.and cuts are a breeze.
"Bodysnatcher" <GetLost@btinternet.com> wrote in message
news:cmjn6i$7vi$1@sparta.btinternet.com...
Is Womble better,easy to work then MF2 or MF3?
The problem I 've had with both is the removing of frames of unwanted
video.
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqjd73bk4vf5c@corp.supernews.com...
Nothing is better than the win2000 capture program for that card, use
it
and
educate yourself, I have created many dvds with it.I use:
Win2000 to capture.
Womble for editing
DVDWorkshop for chapter, etc.
You wont need any other software.
"Bodysnatcher" <GetLost@btinternet.com> wrote in message
news:cmji8f$16l$1@sparta.btinternet.com...
Hi.
Can anyone tell me if this is correct,
Brought a wintv pvr250 capture card, this comes with moviefactory2.
Not really happy with this set-up, so as I've had some success with
capturing vhs tape using vitualdub, tempgnec xpress and author,
tried
to
use
this card with vitualdub but it does not seem to recognize the card.
Is
it
not supported or have i got to D/L something else to make it see the
card?
Cheers
|
|
|
| Back to top |
|
|
Ken Maltby
Guest
|
| Posted:
Sun Nov 07, 2004 5:40 am Post subject:
Re: Just to confirm? |
|
|
| Quote: | "Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:iIudnf9qstMM-hDcRVn-pg@giganews.com...
You might try VideoReDo www.VideoReDo.com it is the new
guy and tries harder.
Luck;
Ken
"doS" <kobo65@notSOHOTmail.com> wrote in message |
news:10oqqqg5hpdsk5b@corp.supernews.com...
| Quote: | Then frame by frame edit isnt there...
|
Not so, VideoReDo does frame accurate edits and is very
fast. Give it a try and post, here, how it compares to your
Womble product.
Luck;
Ken |
|
| Back to top |
|
|
doS
Guest
|
| Posted:
Sun Nov 07, 2004 5:51 am Post subject:
Re: Just to confirm? |
|
|
can it convert vob back to mpg ;-)
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:BrWdnd8Nz-NS8xDcRVn-hg@giganews.com...
| Quote: | "Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:iIudnf9qstMM-hDcRVn-pg@giganews.com...
You might try VideoReDo www.VideoReDo.com it is the new
guy and tries harder.
Luck;
Ken
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqqqg5hpdsk5b@corp.supernews.com...
Then frame by frame edit isnt there...
Not so, VideoReDo does frame accurate edits and is very
fast. Give it a try and post, here, how it compares to your
Womble product.
Luck;
Ken
|
|
|
| Back to top |
|
|
Ken Maltby
Guest
|
| Posted:
Sun Nov 07, 2004 6:02 am Post subject:
Re: Just to confirm? |
|
|
Yes
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqsbtif30eg37@corp.supernews.com...
| Quote: | can it convert vob back to mpg ;-)
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:BrWdnd8Nz-NS8xDcRVn-hg@giganews.com...
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:iIudnf9qstMM-hDcRVn-pg@giganews.com...
You might try VideoReDo www.VideoReDo.com it is the new
guy and tries harder.
Luck;
Ken
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqqqg5hpdsk5b@corp.supernews.com...
Then frame by frame edit isnt there...
Not so, VideoReDo does frame accurate edits and is very
fast. Give it a try and post, here, how it compares to your
Womble product.
Luck;
Ken
|
|
|
| Back to top |
|
|
doS
Guest
|
| Posted:
Sun Nov 07, 2004 6:55 am Post subject:
Re: Just to confirm? |
|
|
I still havent found the frame by frame button
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:24GdnbMZA61x7hDcRVn-1w@giganews.com...
| Quote: | Yes
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqsbtif30eg37@corp.supernews.com...
can it convert vob back to mpg ;-)
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:BrWdnd8Nz-NS8xDcRVn-hg@giganews.com...
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:iIudnf9qstMM-hDcRVn-pg@giganews.com...
You might try VideoReDo www.VideoReDo.com it is the new
guy and tries harder.
Luck;
Ken
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10oqqqg5hpdsk5b@corp.supernews.com...
Then frame by frame edit isnt there...
Not so, VideoReDo does frame accurate edits and is very
fast. Give it a try and post, here, how it compares to your
Womble product.
Luck;
Ken
|
|
|
| Back to top |
|
|
Ken Maltby
Guest
|
| Posted:
Sun Nov 07, 2004 8:02 am Post subject:
Re: Just to confirm? |
|
|
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10or03jdsbdvdc7@corp.supernews.com...
| Quote: | I still havent found the frame by frame button
|
If you mean the navigation within the editor, all the
controls are configurable. The defaults for a 1 frame
move are the left & right arrows. You might just bring
up the help, and read a little.
If you mean to set the editor to "frame accurate mode",
it is the normal default, but check the box for it on the
general options page, if it was somehow turned off.
Luck;
Ken |
|
| Back to top |
|
|
doS
Guest
|
| Posted:
Sun Nov 07, 2004 8:30 am Post subject:
Re: Just to confirm? |
|
|
I see now thanks.
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:85GdnTPM2P2xDRDcRVn-gg@giganews.com...
| Quote: |
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10or03jdsbdvdc7@corp.supernews.com...
I still havent found the frame by frame button
If you mean the navigation within the editor, all the
controls are configurable. The defaults for a 1 frame
move are the left & right arrows. You might just bring
up the help, and read a little.
If you mean to set the editor to "frame accurate mode",
it is the normal default, but check the box for it on the
general options page, if it was somehow turned off.
Luck;
Ken
|
|
|
| Back to top |
|
|
luminos
Guest
|
| Posted:
Sun Nov 07, 2004 9:08 am Post subject:
Re: Just to confirm? |
|
|
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:85GdnTPM2P2xDRDcRVn-gg@giganews.com...
| Quote: |
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10or03jdsbdvdc7@corp.supernews.com...
I still havent found the frame by frame button
If you mean the navigation within the editor, all the
controls are configurable. The defaults for a 1 frame
move are the left & right arrows. You might just bring
up the help, and read a little.
If you mean to set the editor to "frame accurate mode",
it is the normal default, but check the box for it on the
general options page, if it was somehow turned off.
Luck;
Ken
|
The default is not frame by frame. I think this is something the author
should change, since many will do a quick try, notice it is moving in half
seconds, and discard the program. |
|
| Back to top |
|
|
Ken Maltby
Guest
|
| Posted:
Sun Nov 07, 2004 10:07 am Post subject:
Re: Just to confirm? |
|
|
"luminos" <logos1@trip.net> wrote in message
news:10or7uhc35c15f@news20.forteinc.com...
| Quote: |
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:85GdnTPM2P2xDRDcRVn-gg@giganews.com...
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10or03jdsbdvdc7@corp.supernews.com...
I still havent found the frame by frame button
If you mean the navigation within the editor, all the
controls are configurable. The defaults for a 1 frame
move are the left & right arrows. You might just bring
up the help, and read a little.
If you mean to set the editor to "frame accurate mode",
it is the normal default, but check the box for it on the
general options page, if it was somehow turned off.
Luck;
Ken
The default is not frame by frame. I think this is something the author
should change, since many will do a quick try, notice it is moving in half
seconds, and discard the program.
|
He did, the current version defaults to "1 frame" for the unshifted
arrows.
I just reset the defaults to make sure. I have my mouse wheel set to "1
Frame" also, makes it quick to click on the slider then use the wheel to get
to the exact frame I want.
One of the coolest features of this editor is how configurable the
controls
are. You can make it really fit your workflow.
Luck;
Ken |
|
| Back to top |
|
|
luminos
Guest
|
| Posted:
Sun Nov 07, 2004 10:23 am Post subject:
Re: Just to confirm? |
|
|
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:H8ednW3qHoP0MBDcRVn-ig@giganews.com...
| Quote: |
"luminos" <logos1@trip.net> wrote in message
news:10or7uhc35c15f@news20.forteinc.com...
"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message
news:85GdnTPM2P2xDRDcRVn-gg@giganews.com...
"doS" <kobo65@notSOHOTmail.com> wrote in message
news:10or03jdsbdvdc7@corp.supernews.com...
I still havent found the frame by frame button
If you mean the navigation within the editor, all the
controls are configurable. The defaults for a 1 frame
move are the left & right arrows. You might just bring
up the help, and read a little.
If you mean to set the editor to "frame accurate mode",
it is the normal default, but check the box for it on the
general options page, if it was somehow turned off.
Luck;
Ken
The default is not frame by frame. I think this is something the author
should change, since many will do a quick try, notice it is moving in
half seconds, and discard the program.
He did, the current version defaults to "1 frame" for the unshifted
arrows.
I just reset the defaults to make sure. I have my mouse wheel set to "1
Frame" also, makes it quick to click on the slider then use the wheel to
get
to the exact frame I want.
One of the coolest features of this editor is how configurable the
controls
are. You can make it really fit your workflow.
Luck;
Ken
|
I don't disagree, but new users will not reach for the arrow buttons, but
the slider. |
|
| Back to top |
|
|
|
|
|
|
Profile
Log in to check your private messages
Log in