| Author |
Message |
Lincoln J. King-Cliby
Guest
|
 Posted:
Sat Nov 20, 2004 12:27 pm Post subject:
Mixwiz 12:2DX 9-10 and 11-12 |
|
|
Hi all,
I'm 99% sure what the answer is, but since I didn't see a definate
answer in the manual, just to confirm: On the A&H MixWiz 12:2DX the
9-10 and 11-12 inputs are ONLY unbalanced... No way to feed a balanced
signal into, say the 1/4" TRS jacks, right? (I'm guessing the TRS are
Left/Right/Shield and not +/-/G as the other jacks are).
Thanks!
Lincoln
|
|
| Back to top |
|
 |
Jason Lavoie
Guest
|
| Posted:
Sat Nov 20, 2004 9:56 pm Post subject:
Re: Mixwiz 12:2DX 9-10 and 11-12 |
|
|
On 19 Nov 2004 23:27:01 -0800, chsvideo@hotmail.com (Lincoln J.
King-Cliby) wrote:
| Quote: | Hi all,
I'm 99% sure what the answer is, but since I didn't see a definate
answer in the manual, just to confirm: On the A&H MixWiz 12:2DX the
9-10 and 11-12 inputs are ONLY unbalanced... No way to feed a balanced
signal into, say the 1/4" TRS jacks, right? (I'm guessing the TRS are
Left/Right/Shield and not +/-/G as the other jacks are).
Thanks!
Lincoln
|
in the brochure at
http://www.allen-heath.com/DL/wz122dx_162dx_brochure_issue3.pdf
it says that inputs 9-12 are unbalanced.
Jason |
|
| Back to top |
|
|
Rick Stansby
Guest
|
| Posted:
Sun Nov 21, 2004 7:02 am Post subject:
Re: Mixwiz 12:2DX 9-10 and 11-12 |
|
|
chsvideo@hotmail.com (Lincoln J. King-Cliby) wrote in message news:<45fa70e4.0411192327.6172dee2@posting.google.com>...
| Quote: | Hi all,
I'm 99% sure what the answer is, but since I didn't see a definate
answer in the manual, just to confirm: On the A&H MixWiz 12:2DX the
9-10 and 11-12 inputs are ONLY unbalanced... No way to feed a balanced
signal into, say the 1/4" TRS jacks, right? (I'm guessing the TRS are
Left/Right/Shield and not +/-/G as the other jacks are).
Thanks!
Lincoln
Each stereo input has a pair of unbalanced RCA jacks and a pair of |
balanced 1/4" jacks. So this answer is yes you can feed a balanced
signal into the 1/4" TRS jacks. I found this out by looking at a
picture of the mixer. You can see on the jack panel that there are
two 1/4" jacks for each stereo channel. That would be either 2 TS
unbalanced inputs or 2 TRS balanced inputs. Silkscreened at the
middle of the jackplate is a legend which indicates that the line
inputs are TRS balanced. If those jacks were unbalanced this would
have been specified.
Hope this helps.
--
Rick |
|
| Back to top |
|
|
Jason Lavoie
Guest
|
| Posted:
Sun Nov 21, 2004 9:44 am Post subject:
Re: Mixwiz 12:2DX 9-10 and 11-12 |
|
|
On 20 Nov 2004 18:02:45 -0800, rick-o@pacbell.net (Rick Stansby)
wrote:
| Quote: | chsvideo@hotmail.com (Lincoln J. King-Cliby) wrote in message news:<45fa70e4.0411192327.6172dee2@posting.google.com>...
Hi all,
I'm 99% sure what the answer is, but since I didn't see a definate
answer in the manual, just to confirm: On the A&H MixWiz 12:2DX the
9-10 and 11-12 inputs are ONLY unbalanced... No way to feed a balanced
signal into, say the 1/4" TRS jacks, right? (I'm guessing the TRS are
Left/Right/Shield and not +/-/G as the other jacks are).
Thanks!
Lincoln
Each stereo input has a pair of unbalanced RCA jacks and a pair of
balanced 1/4" jacks. So this answer is yes you can feed a balanced
signal into the 1/4" TRS jacks. I found this out by looking at a
picture of the mixer. You can see on the jack panel that there are
two 1/4" jacks for each stereo channel. That would be either 2 TS
unbalanced inputs or 2 TRS balanced inputs. Silkscreened at the
middle of the jackplate is a legend which indicates that the line
inputs are TRS balanced. If those jacks were unbalanced this would
have been specified.
Hope this helps.
|
I think that diagram on the back of the mixer is refering to the
stereo returns, not the stereo channel inputs.
Jason |
|
| Back to top |
|
|
|
|
|
|
Profile
Log in to check your private messages
Log in