| Author |
Message |
Jill haoulder
Guest
|
 Posted:
Sat Jun 18, 2005 10:23 pm Post subject:
Anyone Converted any WMV HD clips to Divx 6 HD and ar ethey |
|
|
Or alteast the same quality and smaller. HD is Still great quality not
saying Divx 6 HD would make HD any better :)
Going to do alittle HD recording and just wondering how easy and fast
it realy is :)
Thanks.
|
|
| Back to top |
|
 |
Billy Joe
Guest
|
| Posted:
Sat Jun 18, 2005 11:19 pm Post subject:
Re: Anyone Converted any WMV HD clips to Divx 6 HD and ar et |
|
|
Jill haoulder wrote:
| Quote: | Or alteast the same quality and smaller. HD is Still great
quality not
saying Divx 6 HD would make HD any better :)
Going to do alittle HD recording and just wondering how easy
and fast
it realy is :)
Thanks.
|
Not yet, but initial testing in the Home-theater setting (upped
to 1.3 mbps) is discouraging.
BJ |
|
| Back to top |
|
|
Jill haoulder
Guest
|
| Posted:
Sat Jun 18, 2005 11:36 pm Post subject:
Re: Anyone Converted any WMV HD clips to Divx 6 HD and ar et |
|
|
Iam doing a convert now. High Def. Using a 1080i WMV file. How do i
change the bitrates. Do i need to be registered to do that ?
Thanks.
On Sat, 18 Jun 2005 11:19:41 -0700, "Billy Joe" <see.sig@invalid.org>
wrote:
| Quote: | Jill haoulder wrote:
Or alteast the same quality and smaller. HD is Still great
quality not
saying Divx 6 HD would make HD any better :)
Going to do alittle HD recording and just wondering how easy
and fast
it realy is :)
Thanks.
Not yet, but initial testing in the Home-theater setting (upped
to 1.3 mbps) is discouraging.
BJ
|
|
|
| Back to top |
|
|
Billy Joe
Guest
|
| Posted:
Sun Jun 19, 2005 12:36 am Post subject:
Re: Anyone Converted any WMV HD clips to Divx 6 HD and ar et |
|
|
Jill haoulder wrote:
| Quote: | Iam doing a convert now. High Def. Using a 1080i WMV file. How
do i
change the bitrates. Do i need to be registered to do that ?
Thanks.
On Sat, 18 Jun 2005 11:19:41 -0700, "Billy Joe"
see.sig@invalid.org
wrote:
Jill haoulder wrote:
Or alteast the same quality and smaller. HD is Still great
quality not
saying Divx 6 HD would make HD any better :)
Going to do alittle HD recording and just wondering how easy
and fast
it realy is :)
Thanks.
Not yet, but initial testing in the Home-theater setting
(upped
to 1.3 mbps) is discouraging.
BJ
|
I am registered, but I don't think my codec operates any
differently for other versions. I am not, however, using the
Divx Converter. If you're using this toy, there is no way to
change the settings that I can see.
I'm using VDub-MPEG2 at the moment, and tested FlaskMPEG
yesterday. Both interface smoothly with the Divx6 codec.
Since both PCs here are also converting at the moment, I can't
(won't) access the codec setup screens now. However, from
memory, the speed setting is right next to the pass control box.
Just type in the value you want. I seem to recall, in older
versions, there is a range limit - but I forget what it might
have been:-(
My inclination is to use "unrestricted" rather than any of
Divx's presets. With 5.x it did not interfere with my Divx
players, as long as I didn't use q-pel.
BJ |
|
| Back to top |
|
|
Jill haoulder
Guest
|
| Posted:
Sun Jun 19, 2005 1:16 am Post subject:
Re: Anyone Converted any WMV HD clips to Divx 6 HD and ar et |
|
|
I Used the Hidef to convert a 150 meg WMA HD 1080i clip. AND YES ITS
Smaller :)
But the problem is it does not save it as a 1080i resolution file. It
saves it at a 1280 by 528. The clip looks ok but it aint 1920 by
1080. The file is 29 megs compressed and RAPPED :p
Would be nice to see what kind of compression it could so and still
keep it at the original file size. untill then this software bites.
See ya.
On Sat, 18 Jun 2005 12:36:04 -0700, "Billy Joe" <see.sig@invalid.org>
wrote:
| Quote: | Jill haoulder wrote:
Iam doing a convert now. High Def. Using a 1080i WMV file. How
do i
change the bitrates. Do i need to be registered to do that ?
Thanks.
On Sat, 18 Jun 2005 11:19:41 -0700, "Billy Joe"
see.sig@invalid.org
wrote:
Jill haoulder wrote:
Or alteast the same quality and smaller. HD is Still great
quality not
saying Divx 6 HD would make HD any better :)
Going to do alittle HD recording and just wondering how easy
and fast
it realy is :)
Thanks.
Not yet, but initial testing in the Home-theater setting
(upped
to 1.3 mbps) is discouraging.
BJ
I am registered, but I don't think my codec operates any
differently for other versions. I am not, however, using the
Divx Converter. If you're using this toy, there is no way to
change the settings that I can see.
I'm using VDub-MPEG2 at the moment, and tested FlaskMPEG
yesterday. Both interface smoothly with the Divx6 codec.
Since both PCs here are also converting at the moment, I can't
(won't) access the codec setup screens now. However, from
memory, the speed setting is right next to the pass control box.
Just type in the value you want. I seem to recall, in older
versions, there is a range limit - but I forget what it might
have been:-(
My inclination is to use "unrestricted" rather than any of
Divx's presets. With 5.x it did not interfere with my Divx
players, as long as I didn't use q-pel.
BJ
|
|
|
| Back to top |
|
|
|
|
|
|
Profile
Log in to check your private messages
Log in