GRussinko
Guest
|
 Posted:
Sun Mar 27, 2005 10:59 pm Post subject:
Old Receiver Question |
|
|
The solder was good originally, but stress on the board had broken al
the connections and pushed them up, so half the solder joint (the par
still on the pin) was sitting higher than the other half (on th
board).
Steve Urbach Wrote:
| Quote: | On Sat, 26 Mar 2005 23:29:51 +0000, GRussinko
GRussinko.1mj6po@audiobanter.com wrote:
-
I fixed it - it turned out to be a row of 10 solder connections that
were all broken, and were wiggling around whenever the board was
flexed. Resoldering them did the trick, now the display's workin
like
new.-
Great that you fixed it. I am really suprised that ther were 10 bad.
Was the original solder flow poor or does the display (heat?)flex the
PTH to cause the crack?
, _
, | \ MKA: Steve Urbach
, | )erek No JUNK in my email please
, ____|_/ragonsclaw
dragonsclawJUNK@JUNKmindspring.com
, / / / Running United Devices "Cure For Cancer" Project 24/7
Have you helped? http://www.grid.or
|
--
GRussinko
|
|
Profile
Log in to check your private messages
Log in