Help w/Dyna FM1
DVD-Software.info Forum Index DVD-Software.info
Your one stop source for DVD Software
 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Help w/Dyna FM1
 
Post new topic   Reply to topic    DVD-Software.info Forum Index -> Tubes
Author Message
Rimfire1022
Guest





Posted: Mon Jan 03, 2005 4:18 am    Post subject: Help w/Dyna FM1 Reply with quote

I was hoping someone could tell me the value of C29 on board PC-8 of an FM 1...
I have the schematic for the FM 3, but the 1 is a bit different, it does not
use the PEC on the PC-8 board...The one I am working on looks like a .0001
silver mica cap....
TIA

Back to top
Chris Hornbeck
Guest





Posted: Mon Jan 03, 2005 7:49 am    Post subject: Re: Help w/Dyna FM1 Reply with quote

On 02 Jan 2005 23:18:13 GMT, rimfire1022@aol.com (Rimfire1022) wrote:

Quote:
I was hoping someone could tell me the value of C29 on board PC-8 of an FM 1...
I have the schematic for the FM 3, but the 1 is a bit different, it does not
use the PEC on the PC-8 board...The one I am working on looks like a .0001
silver mica cap....

My manual shows C29 as the coupling cap feeding the top of the
volume control, " .47mfd @ 100 v." , which today we'd call
0.47 uF @ 100 WVDC. Seems kinda high, but any mica is likely
too small.

Good fortune,

Chris Hornbeck
"They'd meet at the Tout Va Bien."
-JLG, _Bande a part_, 1964
Back to top
Steve O'Neill
Guest





Posted: Mon Jan 03, 2005 7:50 am    Post subject: Re: Help w/Dyna FM1 Reply with quote

Hi:

You must have PNs mis-stated below: C29 on PC8 lists as 0.47uF/100V. If
your FM1 is still mono maybe you're looking for the value of the de-emphasis
network cap C28 (0.0075uF). When converted to stereo, the de-emphasis
network is replaced with a different RC network designed to accentuate the
pilot/subcarrier level. On the FM1 this alternate network is implemented
with discrete components; on the FM3 a PEC used.

--
Steve

"Rimfire1022" <rimfire1022@aol.com> wrote in message
news:20050102181813.08198.00003193@mb-m04.aol.com...
Quote:
I was hoping someone could tell me the value of C29 on board PC-8 of an FM
1...
I have the schematic for the FM 3, but the 1 is a bit different, it does
not
use the PEC on the PC-8 board...The one I am working on looks like a .0001
silver mica cap....
TIA
Back to top
 
Post new topic   Reply to topic    DVD-Software.info Forum Index -> Tubes All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Office Forum Access Forum Exchange Server

Powered by phpBB